Currencies    
Shopping Cart:  0 items
 |  Register  |  Log In | 
Account  Log-In   or  Register
 

Work Supports Includes:

High Pressure Work Supports
High Pressure Work Supports
Low Pressure Work Supports
Low Pressure Work Supports
Leave us your E-Mail Address for us to update you the latest information: Click
Contact us via Email: sales@mta-direct.com
We offer Online Ordering and Worldwide Delivery Service
  Introduction

The HSP/LSP Work Support adds rigidity to the work part when machining. This supporting eliminates deformation and vibration which are caused by machining force acting on the work part with insufficient rigidity. Refer to the following figure, the work support will adust it's height to the contour of the work part, then the input hydraulic pressure will lock the plunger in position to offer supporting force. According to differnt jig designs, HSP/LSP Work Supports can work with Hydro/Air Swing Clamps, Hydro/Air Lever Clamps, and Manual Clamps.



Model HSP/SP - High Pressure Hydraulic Work Support
*. Minimum operating pressure: 100kg/cm2.
*. With compact size and allows more compact jig pallet design.

Model LSP - Low Pressure Hydraulic Work Support
*. Operating pressure range: 10-70 kg/cm2.
*. Offering high supporting force under regular hydraulic pressure.


Spring Ejected Type (A-Type) and Hydraulic Ejected Type (B-Type)

According to different work part loading methods, there are 2 types of work supports are available for different jig design: the Spring Ejected Type (A-Type) and the Hydraulic Ejected Type (B-Type).

Spring Ejected Type (HSP-16A1 / SP-25A / SP-M25A / .....): The operator loads the work part downward to depress the spring embeded in the HSP/LSP Work Support, the work support adjusts its height to the contour of the work part. Then we switch on the pressure to lock the work support as a rigid support to the work part.

Hydraulic Ejected Type (HSP-16B1 / SP-25B / SP-M25B / .....): The plunger of the B type work support is in retracted position as default position to allow an unobstructed work part loading. The operator loads the work part, then he/she switch on the pressure to move the plunger upward. When the plunger touches the work-part, the work support locks up as a rigid support to the work part.



 
 
What's New?
SP-25B Hydraulic Work Support - Hydraulic Ejected
SP-25B Hydraulic Work Support - Hydraulic Ejected
*. Hydraulic Ejected Work Support.
*. Rod size: 25mm / Rod stroke: 12mm.
*. Supporting force: 2000kgf at 500kg/cm2.
*. Operating pressure: 100-500kg/cm2.
*. Bo
$406.0USD



SP-32B Hydraulic Work Support - Hydraulic Ejected
SP-32B Hydraulic Work Support - Hydraulic Ejected
*. Hydraulic Ejected Work Support.
*. Rod size: 32mm / Rod stroke: 12mm.
*. Supporting force: 2000kgf at 500kg/cm2.
*. Operating pressure: 100-500kg/cm2.
*. Th
$406.0USD



SP-40B Hydraulic Work Support - Hydraulic Ejected
SP-40B Hydraulic Work Support - Hydraulic Ejected
*. Hydraulic Ejected Work Support.
*. Rod size: 40mm / Rod stroke: 12mm.
*. Supporting force: 5000kgf at 500kg/cm2.
*. Operating pressure: 100-500kg/cm2.
*. Bo
$535.0USD



SP-M25B Hydraulic Work Support -Hydraulic Ejected
SP-M25B Hydraulic Work Support -Hydraulic Ejected
*. Hydraulic Ejected Work Support.
*. Rod size: 25mm / Rod stroke: 12mm.
*. Supporting force: 2000kgf at 500kg/cm2.
*. Operating pressure: 100-500kg/cm2.
*. Bo
$406.0USD



 
Lowest Price Guaranteed
Best Price Promise
For Following Categories
(Learn More)
 
Special Discounts


C1TA190 Open Center Compact Hydraulic Cylinder
C1TA190 Open Center Compact Hydraulic Cylinde
$2,640.0USD
$2,455.0USD

 
More Items
 
Shopping Cart
  0 items
 
Currencies